845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Wood Carving Tools
Constructed with an ash handle and a honed and polished, high-carbon steel blade. General-purpose carving knife. It's more rounded point is very durable. Great beginners knife. 1-1/8" blade length.
Constructed with an ash handle and a honed and polished, high-carbon steel blade. Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 1-1/2" blade can accommodate larger stock removal if needed.
Constructed with an ash handle and a honed and polished, high-carbon steel blade. Features a straight, 2" blade, for heavier stock removal with a rounded durable point.
Constructed with an ash handle and a honed and polished, high-carbon steel blade. Traditional chip carving knife; is honed, polished, and ready-to-carve.
Constructed with an ash handle and a honed and polished, high-carbon steel blade. The curved 1-5/8" blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
Constructed with an ash handle and a honed and polished, high-carbon steel blade. Offers the same features as its larger brother (KN18) only with a 7/8" ultra thin blade for the lowest resistance when fine cutting is required. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
Constructed with an ash handle and a honed and polished, high-carbon steel blade. The mini-chip carving knife has a 5/8" ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
Constructed with an ash handle and a honed and polished high-carbon steel blade. The hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.
Each carving knife is constructed with an ash handle and a honed and polished, high-carbon steel blade. Set includes a KN12 cutting knife, KN13 detail knife, KN18 pelican knife, KN19 mini-pelican knife, and tool roll.
Designed for quickly maintaining a sharp edge, Flexcut Gold polishing compound has been specifically formulated to apply like a crayon. Its blend of aluminum and titanium oxide provides a balance between aggressive removal of hardened tool steel and offering a high-color polish.
The Flexcut SlipStrop is an economical way for maintaining tool's razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Either side of the strop can be used. Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions.
Contains palm handle, 4 interchangable blades, and wood block with preprinted design for carving. Includes 10-pocket rolled storage pouch. Included blades: No. 3 - 3/8" sweep, No. 6 - 5/16" sweep, No. 9 - 1.5mm sweep, and 70 deg. 1/4" V-tool.
Contains palm handle, 10 interchangable blades, and wood block with preprinted design for carving. Includes rolled storage pouch. Included blades: No. 1 - 1/4" single bevel chisel, No. 3 - 3/8" sweep, No. 3 - 5/8" sweep, No. 5 - 9/16" sweep, No. 6 - 5/16" sweep, No. 9 - 1/5mm sweep, No. 11 - 1/8" sweep, No. 11 - 1/4" sweep, 45 deg. 1mm V-tool, and 70 deg. 1/4" V-tool.